Leica-biosystems ST5020 Manuel d'utilisateur télécharger pdf (Page 29)

Leica ST5020

5.1 Switching the instrument on

5. Operation

• When switched on, the instrument will take a

few seconds to initialize. During initialization

the screen is blue, initialization progress is

indicated by a line of white dots.

• After approx. 30 seconds, the graphic sur-

face will become visible. The working area is

still black. A row of “X“ displays the soft-

ware loading in the information line.

• Next, the LANGUAGE CHOICE menu (

Fig. 24)

will be shown on the screen for approx.

three secs.

Caution!

The instrument MUST be connected to an earthed mains power outlet socket.

It is recommended that the Leica ST5020 be plugged into a wall socket that has Ground

Fault Circuit Interruption (GFCI) protection - as an additional electrical safeguard.

• Before you connect the instrument to the wall socket, make sure the

mains switch at the bottom right of the instrument is in position OFF (‘0’).

• Connect the mains cable to the wall socket and switch on the mains

supply at the wall socket (if applicable).

• Switch the mains switch ON (‘I’).

Fig.8

Fig. 25

Fig. 24

• If you select a different language (press the

corresponding button), the MAIN MENU

(Fig. 32, chapter 5.3.4) will be shown next, in

the new language selected.

• If no changes are made, the INSTRUMENT

STATUS menu (

Fig. 25) will open up.

INSTRUMENT STATUS is the standard

screen - all functional descriptions in the

present

chapter 5 start from INSTRUMENT

STATUS.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 87 88

Pas de commentaire

Leica-biosystems ST5020 Manuel d'utilisateur Page 29